Replacement Keys For the 03-11 Saab 9-3
It is important to replace your car keys immediately when you lose them. This could save you a lot of cash in the long run. However many owners of the 03-11 Saab 9-3 have a tough time finding a good place to purchase replacement keys.
The addition of a second key to your Saab isn't as complicated as you think. All you require is a flathead screwdriver and some patience.
Replacement cases for the SAAB 9-3 key fob
Saab owners should always carry at least one spare key for their vehicles since losing the sole working key can cost a significant amount. While it is simpler to duplicate a classic car key, Saab's contemporary keys have an immobilizer feature that only the owner knows how to disable. The key is an electronic device that communicates with the car's computer, and it comes with a chip which is unique to each car.
It's simple to replace the case on the Saab 9-3 Key Folio. You don't require any special tools. All you require is a flathead screwdriver open the case. Be careful not to damage any electronic components. Once the case is removed, you can install the battery and then reassemble your SAAB 9-3 keyfob.
You can buy a replacement case for your car key fob, but beware of items that are advertised for this model. They may not be compatible with your car as they aren't SAAB-approved. They could also cause irreversible damage to the electronics of your vehicle. Instead, look for genuine Saab parts that are sourced from reputable suppliers. This will guarantee that your replacement part is of the highest quality. Find a locksmith near you who specializes in Saab.
Remove the emergency key from your SAAB 9-3 keyfob
The 03-11 SAAB 9-3 was a stunning car, and lots of them can still be seen all over the world. One of the most common issues for this car is the key fob, which is prone to wear out easily. This problem can be easily and cheaply solved. Simply replace the case of your SAAB 9-3 key fob and it will be like new!
The SAAB key fob is an electronic remote control that comes with a manual key to open the doors and start the engine. It is easy to make a copy of this key, however it is much more difficult to copy the electronic part. This is due to the fact that the electronic components of these keys are protected by a specific chip that stops anyone from trying to copy them without a Saab-approved tool, which is known as a Tech-2.
Dealers can add another key to the price of Saab however, the cost is a few hundred dollars. This is because it requires a brand new CIM Module and a key that has electronic. However you can save money by removing the emergency key from the SAAB 9-3 key fob and reprogramming the device. To do this, place the flathead screwdriver into the slot located at the middle of the case. Make sure to work it open gently.
Removing the battery from the SAAB 9-3 key fob
The loss of your car keys or lost is a frustrating experience. If you must go to the dealer, it can be expensive. However, if you're lucky enough to get a spare key, AutoLocks LTD can provide you with the replacement key you require at 75% less than the price the dealer would charge.
It is easy to change the battery in the SAAB 9-3 keyfob. First, you need to remove the emergency key. Press the blue button on your key fob to do this. This will release the emergency key that you can remove. Avoid spraying liquids on the emergency key. This can damage the electronic components.
Then, remove the plastic cover on the back of the key fob. This can be done with a screwdriver. After removing the cover, you'll be able open the case and change the battery. Use the flathead screwdriver to prevent damaging the plastic.
It is a good thing to get a second key in case you only have one that works. This will save you money in the long term. A second key is less expensive than replacing the key fob and you don't have to be concerned about programming it at the dealer.
Replacing the SAAB 9-3 key fob
In the case of cars like the Saab 9-3 that only have one key it is a good idea to get an additional key as soon as you can. Making a new key is not inexpensive, but it's considerably less expensive than replacing the entire vehicle. You'll need a specific tool known as Tech2 to create an ignition key that is new. The car will also require an entirely new CIM module as well as a brand new ignition key. A new key has to be the sole one programmed to the car, and is not able to be used on other vehicles.
To replace a Saab 9-3 fob, the owner needs to contact the dealer's customer service department and schedule an appointment to replace the only car key. The service technician will require a unique code to program the new key and the TWICE or CIM module might have to be replaced. replacement saab key www.g28carkeys.co.uk will have to reprogram the ignition cylinders to accept the new keys.
Switching the battery on a Saab 9-3 key fob is an easy procedure. You can remove the emergency key by using an phillips screwdriver with a flat head. Place the screwdriver into the slot located in the middle of the Fob and gently move it around. After a few minutes the case will break open, and you'll be able to easily access the battery. It is recommended to avoid pouring liquids on the Fob, as this could damage the electronic components.